Startseite Demontage Montage Warum Ente? Warum Ente? Zeichnungen Tips Bildergalerie History Printed matters Videos Stichwortverzeichnis Kontakt Links Deutsche Version

Back to doors     Forward to electronic engine compartment

2CV front wiring harness
The front wiring harness, responsible for everything in the engine compartment and the dashboard.
To install, push the cables from the interior outward to the engine compartment. Otherwise it's difficult to handle.
The way each cable finds its counterpart, is to be described in the following.

2CV front wiring harness dashboard
The individual parts of the dashboard.

2CV front wiring harness
Control lights and switches of the dashboard:
Left above: Control light brake fluid. 1. Plug red with green cable, 2. Plug violet with grey cable.
In the middle of above: Control light oil pressure. 1. Plug violet with green cable, 2. Plug white with green cable.
On the top right: Control light warning lights. 1. Plug white with brown cable, 2. Plug brown with brown cable.
On the left of center: Control light direction indicator. 1. Plug brown with green cable, 2. Plug green with green cable.
Picture center: Control light dipped beam. 1. Plug white with green cable, 2. Plug brown with brown cable.
On the right of center: Control light full beam. 1. Plug brown with green cable, 2. Plug blue with green cable.
Left down: Switch windshield wiper. 1. Plug black with yellow cable, 2. Plug white with grey cable, 3. Plug blue with grey cable.
In the middle of down: Switch control light brake fluid. 1. Plug red with green cable, 2. Plug white with green cable.
Right down: Ignition lock. 1. Plug red with yellow cable, 2. Plug violet with yellow cable, 3. Plug black with blue cable.

2CV front wiring harness speed indicator
The speedometer from the rear:
At left side of the photo are the connections of the fuel indicator (Violett=Positive, Yellow=Signal tank giver), down is the lighting (white plug), in the center the ground connection (brown) and right the voltage indicator (Violett=Positive). Don't forget to plug in the speedometer shaft.

2CV front wiring harness switches
Left above: Multi-function lever for parking light, dipped light and high beam as well as the horn.
The screwing contacts in the clockwise direction have the color codings violet-green, bluish gray, black-grey + black-yellow, yellow-grey, as well as 2x green-grey.
On the top right: The flashing relay. Here the version for a trailer coupling can be seen. This relay switches an additional control light on in the instrument panel when using a trailor. That is prescribed by the TÜV. The plug contacts are white-grey, green green and black grey. Contrary to the normal relay without trailer function the plugs white-grey and green-green are here interchanged.
Left down: The direction indicator lever. Here lustre terminals were attached for separable connection in my case.
Right down: The warning light switch - this plug cannot be exchanged.

2CV front wiring harness windshield wiper
The engine of the windshield wiper is provided with a plug which can't be inverted.

2CV front wiring harness dashboard
If everything is assembled again, it looks like that.

Back to doors     Forward to electronic engine compartment